Features
- Three in one – Combines a sensitometer, a manual and an automatic densitometer in one compact unit
- Exposes a 21-step wedge on blue or green sensitive X-ray films
- Suitable for manual single point measurement of optical densities in the range (0.00 … 4.5) OD
- Includes an automatic densitometer with film feeder
The SensodensiX auto device is a combination of a sensitometer, a manual densitometer and an automatic densitometer for quality control of X-ray film processing and for checking phantom test films.
The single-sided, dual color, light-emitting sensitometer exposes a 21-step wedge on X-ray films. The light emission can be selected for blue sensitive films (spectral maximum 460 nm) and green sensitive films (spectral maximum 510 nm). A calibrated sensitometer version is available. The manually operated densitometer is designed for optical density single-point measurements of processed X-ray films, exposed by a sensitometer or by X-ray equipment. The length of the measuring arm is 20 cm, which makes it possible to measure the optical density even in the middle of large size films (35 cm x 43 cm).
The automatic densitometer includes a mechanism for motor driven film transport and computer controlled measurement and evaluation of test films exposed by the 21-step sensitometer.
An external power supply is required to operate the unit. The device can be connected to a computer via an RS232 interface cable. ConsiX software is available.
Parts
L981267 SensodensiX auto unit
L981268 SensodensiX auto Cal unit with calibrated sensitometer
L178023 RS232 interface cable, 1.8 m, 9 pins
Image Gallery
Click on a thumbnail below to view full size.
Comments are closed.