Features
The auto-ranging 451P features a pressurized ion chamber, providing enhanced sensitivity (µR resolution) and improved energy response to measure radiation rate and dose from x-ray and gamma sources. Originally designed to measure leakage and scatter around diagnostic x-ray and radiation therapy suites, the 451P’s site surveying capabilities make it well-suited for a wide range of end users, including: x-ray manufacturers, government
agencies, state inspectors, biomedical technicians, and maintenance technicians for airport baggage scanners. The ion chamber detector allows for a fast response time to radiation from leakage, scatter beams and pinholes. Additionally, the low noise chamber bias supply provides for fast background settling time. The digital display features an analog bar graph, 2.5 digit digital readout, low battery and freeze (“peak hold”) mode indicators, and an automatic backlight function. User controls consist of an ON/OFF button and a MODE button. The case is constructed of lightweight, high strength materials and is sealed against moisture. The RS-232 interface can be connected directly to a computer for use with the Excel add-in for Windows (451EXL), enhancing the functionality of the instrument. This software allows for data retrieval, user parameter selection and provides a virtual instrument display with audible (requires sound card) and visual alarm indication.
Features:
- High sensitivity µR measurements of rate and dose simultaneously, with the capability to record peak rate
- Ergonomic, anti-fatigue handle with replaceable grip, wrist strap and tripod mount
- Programmable flashing LCD display and audible alarm
- Easily-accessible battery door (operated by two 9-volt alkaline batteries) on the outside of the bottom case
- RS-232 communications interface with optional Windows-based Excel add-in for data logging
- Available with dose equivalent energy response (SI units)
Specifications
Radiation detected
Alpha: > 7.5 MeV
Beta: > 1 MeV
Gamma: > 25 keV
Operating ranges, response time
0 μR/h to 500 μR/h (5 sec)
0 mR/h to 5 mR/h (2 sec)
0 mR/h to 50 mR/h (1.8 sec)
0 mR/h to 500 mR/h (1.8 sec)
0 R/h to 5 R/h (1.8 sec)
Accuracy
Within 10 % of readings between 10 % and 100 % of full scale indication on any range, exclusive of energy response
Detector
Chamber (cc volume air ionization): 230 cc
Controls: ON/OFF and MODE
Automatic features
Auto-zeroing, auto-ranging, and auto-backlight
Power requirements
Two 9 V alkaline, 200 hours operation
Warm-up time
Less than two minutes for initial operation when the instrument is in equilibrium with ambient temperature
Display LCD analog/digital with backlight
Analog: 100 element bar graph 6.4 cm long. Bar graph is divided into 5 major segments, each labeled with the appropriate value for the range of the instrument.
Digital: 2.5 digit display is followed by a significant zero digit depending on the operating range of the instrument. The units of measurement are indicated on the display at all times. Digits are 6.4 mm (0.25 in) high. Low battery and freeze indicators are also provided on the display.
Modes
Integrate mode: Operates continuously 30 seconds after the instrument has been turned on. Integration is performed even if the instrument is displaying in mR/h or R/h.
Freeze mode: Will place a tick mark on the bar graph display to hold on the peak displayed value. The unit will continue to read and display current radiation values.
Environmental
Temperature range:
*4 °F to 122 °F
Relative humidity:
0 % to 100 % (451P);
Geotropism:
Negligible
Typical energy dependence
16Nitrogen gamma rays are 110 % to 120 % of indicated readings as determined at the University of Lowell
Dimensions (WxDxH)
10 cm x 20 cm x 15 cm (4 in x 8 in x 6 in)
Weight
451P: 1.07 kg (2.4 lb)
Product Number: 451P-RYR
Options
451P-DE-SI-RYR Pressurized µR Ion Chamber Survey Meter with dose equivalent chamber
451EXL 451 Assistant for Excel, includes RS-232 interface cable
190HPS Single Unit Carrying Case
Image Gallery
Click on a thumbnail below to view full size.